There are four everyday types of glass edges: seamed, flat polished, pencil polished and beveled. A seamed edge only knocks off the sharp corner. It belongs where a frame hides it. Any edge you’ll see or touch should be polished. Pick the edge before the glass gets tempered. Tempered glass can’t be reworked later.
What are the main types of glass edges?
A seamed edge is the most basic finish. The shop runs the cut edge across a sanding belt. Its only real job is removing the sharp edges. It’s safe to handle with bare hands. But it looks rough and frosty. That’s fine inside a cabinet frame.
A flat polished edge is square and glossy. It has a tiny 45-degree chamfer on the top and bottom corners. It shows off the thickness of the glass. Picture a modern glass table top. That one is usually a flat polish.
A pencil polished edge is rounded, like the side of a pencil. It feels softer under your hand. Glass fabricators favor it for protector tops and glass in high-traffic spots.
A beveled edge is cut at a wide slope. Then the slope gets polished bright. It catches light and frames the glass. You see it on mirrors, door panels and dressier table tops.
There are fancier profiles too, mostly for thick glass. Bullnose is a fuller, deeper round. Ogee mixes a convex and a concave curve. Triple pencil, sometimes called a waterfall edge, repeats the pencil shape. These are specialty orders, not everyday choices.
Which glass edge should you pick for your project?
Start with one simple question first. Will anyone see or touch this edge? If a frame covers it, seamed is enough. That covers most framed shelving work. It covers glass in cabinet doors too.
Exposed glass needs a polished edge. A glass top resting on a wood table is a good example. Flat polish gives it crisp lines. Pencil polish is kinder to little hands. It’s a smart pick for busy kitchens.
Mirrors come down to your own style. A flat polished frameless mirror reads clean and modern. A beveled mirror looks more traditional and a bit more formal. Sheppard’s Glass offers both, along with framed mirrors.
Why does the edge have to be finished before tempering?
Tempering locks the glass into its final shape. Glass industry guidance is blunt about it. Edge work “shall be performed before heat-treating.” It also says tempered glass “cannot be cut after the heat-treating process.”
What if you change your mind later? The piece gets made again from scratch. Tempered glass can’t be cut or reground. So we settle the edge at the measure. Nobody wants to pay for glass twice. Choosing between the types of glass edges is a step Sheppard’s Glass handles before anything gets ordered.
Can you polish the edge of glass you already have?
Sometimes you can, but it depends on the glass. Plain annealed glass can usually be ground and polished after cutting. Tempered glass is a different story, so plan on a new piece. Not sure which kind you have at home? Bring it by the shop and we’ll check.
Frequently asked questions
Do you polish the edges on cut glass? Yes, any edge that will show should be polished. A seamed edge is safe to touch but looks unfinished. Exposed glass should get a flat or pencil polish.
What is the safest glass edge for a table top? A pencil polished edge is the most forgiving shape. Pair it with tempered glass and rounded corners for a family table.
Is a beveled edge stronger than a flat edge? No, the bevel is about looks, not strength. Thickness and tempering decide how tough the glass is.
Can seamed edge glass be used for a shelf? Yes, when the edges sit inside a frame or channel. Open glass shelves look better with a polished edge.
Get the edge right the first time
Bring us the project and Sheppard’s Glass will walk you through the types of glass edges in person. Sheppard’s Glass measures across Columbia, Lexington, Chapin and Lake Murray. See our custom glass table tops and custom mirror installation work. Read what safety glass is before you order. Browse our residential glass installation services, then get a free measure and quote.